Important warning statements
This carbon monoxide alarm is designed to detect carbon
monoxide from ANY source of combustion. It is NOT designed to
detect smoke, fire, or any other gas.
WARNING:
Carbon monoxide alarms are not smoke alarms. This
carbon monoxide alarm is not a substitute for installing and
maintaining an appropriate number of smoke alarms in your
home.
This CO alarm will not sense smoke, fire, or any poisonous gas
other than carbon monoxide even though carbon monoxide can
be generated by fire. For this reason you must install smoke
alarms to provide early warning of fire and to protect you and
your family from fire and its related hazards.
Caution:
This alarm will only indicate the presence of carbon
monoxide at the sensor. Carbon monoxide may be present in
other areas.
WARNING:
This product is intended for use in ordinary indoor
locations of family living units. It is not designed to measure
compliance with Occupational Safety and Health Administration
(OSHA), commercial, or industrial standards. It is not suitable for
installation in hazardous locations as defined in the National
Electric Code.
The installation of this device should not be used as a substitute
for proper installation, use and maintenance of fuel burning
appliances, including appropriate ventilation and exhaust
systems. It does not prevent CO from occurring, nor can it solve an
existing CO problem.
WARNING:
This device is designed to protect individuals from
acute effects of carbon monoxide exposure. It may not fully
safeguard individuals with specific medical conditions.
If in doubt, consult a medical practitioner. Individuals with medical
problems may consider using warning devices which provide
audible and visual signals for carbon monoxide concentrations
under 30 PPM.
This carbon monoxide alarm requires a continuous supply of
electrical power - it will not work without power.
This alarm has not been investigated for carbon monoxide
detection below 70 PPM.
Contact information
For contact information, see www.interlogix.com.
GE and the GE monogram are trademarks of the General Electric
Company and are under license to Interlogix, a UTC Fire & Security
Company, 9 Farm Springs Road, Farmington, CT 06034-4065
For residential consumers, please contact your local security
system installation company for product replacement service.
Product returns from security professionals and installers
Before you can return any product to UTC Fire & Security, you
must obtain a return material authorization (RMA). This applies to
all product returns, including warranty repair/replacements, non-
warranty repairs, advance replacements, and credit returns.
To obtain an RMA, contact:
Security Customer Services:
Phone: 888-437-3287
FAX: 503-691-7566
Email: [email protected]
You will need to have the product and following information ready:
•
Original PO number (not required for distribution partners)
• SKU/part
number
• Serial
number
P/N 466-2393 • REV 00.15 • ISS 07DEC10
7 / 8
Draft
