IMPORTANT: The
door on your new
refrigerator can be installed to open from
the
or
the
The swing of the
outer door and the freezer door both must
be reversed.
I
TOOLS REQUIRED
●
Medium-tip Phillips
●
Allen wrench
screwdriver
●
Pliers
●
Small-tip Phillips
screwdriver
❑
REMOVE THE REFRIGERATOR DOOR
a.
While holding the door steady against the unit
to prevent the door from falling, remove the
top hinge pin with the Allen wrench and
gently pull the pin free with the pliers.
b.
Pull the top of the door toward you far enough
to clear the top hinge.
c. Pull the door upward with a slight jerking
motion to release it
the bottom
hinge pin.
d.
Remove the white nylon washer from the
lower hinge pin, if in place.
❑
REMOVE THE REFRIGERATOR DOOR HINGES.
a. Remove the upper hinge.
1.
Remove the three screws holding the
upper hinge to the cabinet.
Set aside the hinge; reinsert the three
screws in the same holes.
b. Remove the lower hinge.
1. Remove the three screws holding the
lower hinge.
2. Set aside the hinge; reinsert
the three
screws in the same holes.
NOTE: When reinstalling the door hinges, the
bottom hinge will become the top hinge and the
top hinge will become the bottom hinge.
3. Remove the hinge pin from the LOWER
hinge. Insert it in the UPPER hinge
removed earlier. Insert the pin so that it
points upward when the hinge is later
installed at the bottom the cabinet.
4. Place the white nylon washer on
this hinge pin, if used previously.
5. Set aside both hinges.
❑
THE FREEZER
a.
Remove the six mounting screws holding the
freezer door and spacer to the inside wall of
the
b.
Set the freezer door, spacer and six
screws aside.
11
Summary of Contents for TAX6
Page 3: ......
