GE T2100, Service Manual, Page: 13 / 152

Revision A GE T2100 Treadmill 1-5
2021403-031
Introduction: Safety Information
General
This device is intended for use under the direct supervision of a licensed
health care practitioner.
To ensure patient safety, use only parts and accessories manufactured or
recommended by GE Medical Systems
Information Technologies .
Contact GE Medical Systems Information Technologies for information
before connecting any devices to this equipment that are not
recommended in this manual.
Parts and accessories used must meet the requirements of the applicable
IEC 601 series safety standards, and/or the system configuration must
meet the requirements of the IEC 60601-1-1 medical electrical systems
standard.
The use of ACCESSORY equipment not complying with the equivalent
safety requirements of this equipment may lead to a reduced level of
safety of the resulting system. Consideration relating to the choice shall
include:
!
use of the accessory in the PATIENT VICINITY; and
!
evidence that the safety certification of the ACCESSORY has been
performed in accordance to the appropriate IEC 60601-1 and/or IEC
60601-1-1 harmonized national standard.
Equipment Symbols
The following symbols may appear on the equipment.
This symbol means that you must pay attention to the documents delivered with this
equipment. It calls attention to the things to which you must pay special attention during
operation and when the equipment is operated in conjunction with other equipment.
In Europe, this symbol means dangerous or high voltage. In the United States, this symbol
represents the caution notice below:
CAUTION
— To reduce the risk of electric shock, do NOT remove cover (or back). Refer servicing to
qualified personnel.
Type B equipment. Type B equipment is suitable for intentional external and internal
application to the patient, excluding direct conductive connection to the patient’s heart.
Alternating current (AC)
001
002
003
~
004