Digital Timer
Models: 15042, 15089, and 15079
Install Set Up:
1. If the time screen is completely blank it will need to be plugged into an outlet
before programming can begin. If the screen is displaying numbers, it can be
programmed and plugged into the wall afterwards.
2. Before programming, all settings should be reset. The reset button is located
just below the “HOUR” button and is identified by an “R”. Use a paper clip or
ball point pen to push the “R” button. Once pushed the screen will show the
display below on the screen.
See Diagram A
Diagram A
After few seconds
Current Time Setting:
1. Keep the “CLOCK” button pressed during the entire setting operation.
2. Press the “HOUR” button to set the hours.
3. Press the “MIN” button to set the minutes.
4. Press the “DAY” button to select the correct day of the week.
5. Release the “CLOCK” button. The time will now be set!
Programming the On/Off Times:
1. Press the “SET” button once. Diagram B should appear.
2. 1 ON --:-- Should be the first setting. There are a total of 20 On/Off settings.
Diagram B
3. Press the “HOUR” and MIN” buttons to set the ON time.
4. Press the “DAY” button to select the day(s) that this setting is relevant.
5. Press the “SET” button to save and proceed to the 1 OFF --:-- screen.
6. Repeat steps 3, 4, and 5 to set the OFF time. Pressing the “SET” button again
will take you through the other 19 ON/OFF settings.
Multiple Weekday Switching Groups:
Apart from individual week days, pressing the
“
DAY
”
button also selects multiple
day combinations such as:
‧
Monday thru Friday
‧
Tuesday & Thursday & Saturday
‧
Saturday & Sunday
‧
Monday thru Wednesday.
‧
Monday thru Saturday
‧
Thursday thru Saturday.
‧
Monday & Wednesday & Friday
‧
Monday thru Sunday.
After selecting a particular day combination, the ON/OFF selection will be in
effect on the day configuration selected from above.
Restart Button:
1. Press the “SET” button to select the ON/OFF setting that needs to be changed
2. Press the “
” button to reset the current ON/OFF setting seen in Diagram C
without having to scroll through all the hours.
Diagram C
Current time display
Switching Mode Indication:
The actual mode is shown in the display as “ON”, “AUTO ON”, “OFF” or
“AUTO OFF” together with the time of day. Use the “MANUAL” button to adjust
this to the desired setting. This can be used to override the timer as explained
below.
Manual Override Option:
Independent of the programming, it is possible at any given time to advance to
the next switching command by continuously pressing the key “MANUAL” ,as
shown below:
ON = Always ON;
OFF = Always OFF;
AUTO ON = Timer is ON and ON/OFF program is activated.
AUTO OFF = Timer is OFF and ON/OFF program is activated.
Programming the Countdown Feature:
1. Press the “SET” button repeatedly until the CTD icon appears on the display.
Refer to Diagram D
2. Press the “HOUR”, “MIN” buttons to set the amount of time desired for the
device to be on before turning off.
3. Press the “CLOCK” button to store the setting and return to the main display.
Diagram D
Activating the Countdown Feature:
1. Press the “HOUR” and “MIN” button simultaneously to activate the
countdown feature. Refer to Diagram E for more details
2. Other Features of the Countdown
a. Press the “MANUAL” button to pause or continue the countdown.
b. Press the “CLOCK” button to switch between the clock and countdown
display.
c. Press “HOUR” and “MIN” button simultaneously to deactivate the
countdown.
Diagram E
Random, ON/OFF Setting:
1. Press the “HOUR” button for 3 seconds to activate the random feature. The
display will show the RND icon. See Diagram F.
2. Press the “HOUR” button for 3 seconds to deactivate the random feature. The
display will not show the RND icon.
Diagram F
Summer Time Feature (DST):
Push the “CLOCK” button for 3 seconds to advance the current time 1 hour, +1h
icon should appear on the display. Repeating this process will decrease the time
by 1 hour and the +1h icon will disappear. Refer to Diagram G
Diagram G
Power Back Up Feature:
In the event of a power failure, the timer will retain its settings for an estimated 3
months assuming the power back up is fully charged.
HOUR
+ MIN
HOUR
+ MIN
MANUAL
CLOCK
Hour
Current time display
End of countdown ON
Countdown pause
Show current time
Clock
OFF
AUTO ON
ON
AUTO OFF
If your Timer looks like this,
use the following instructions
If your Timer does not look like
this, go to the previous page