GE SpacemakerXL JVM1631CH, Owner'S Manual

Page: 31 / 40

31
Light Bulb Replacement
1
To replace the bulb(s),
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2
Remove the screw at the
front of the light cover
and lower the cover.
3
Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4
Raise the light shield
and replace the screw.
Connect electrical power
to the oven.
Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB36X10003), available
from your GE supplier.
Cooktop Light
1
To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2
Remove the top grille by
taking out the 2 screws
that hold it in place.
3
Remove the charcoal
filter (if present) to
access the light cover
(see Remove Charcoal
Filter section).
4
Remove the light cover
located near the center
of the oven that holds
the bulb. Remove the
bulb by gently turning.
Replace with the same
size and type bulb.
5
Replace the light cover
and charcoal filter
(if present).
6
Replace the grille and
screws. Connect electrical
power to the oven.
Replace the burned-out
bulb with a 30-watt
incandescent bulb
(WB36X10198), available
from your GE supplier.
Oven Light
Remove screw
Screws
Light cover