GE Spacemaker DCXH46 Owner'S Manual & Installation Instructions Download Page 4

4

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

YOUR LAUNDRY AREA

Keep the area underneath and around your
appliances free of combustible materials, such 
as lint, paper, rags and chemicals.

Keep the floor around your appliances clean and
dry to reduce the possibility of slipping.

Keep area around the exhaust opening and
surrounding areas free from the accumulation 
of lint, dust and dirt.

Do not obstruct the flow of ventilating air. Do not
stack or place laundry or throw rugs against the
front or back of the dryer.

Close supervision is necessary if this appliance is
used by or near children. Do not allow children 
to play on, with or inside this or any other
appliance.

Keep all laundry aids (such as detergents,
bleaches, etc.) out of the reach of children,
preferably in a locked cabinet. Observe all
warnings on container labels to avoid injury.

Never climb on or stand on the dryer top. 

WHEN USING YOUR DRYER

Never reach into the dryer while the drum is
moving. Before loading, unloading or adding
clothes, wait until the drum has completely
stopped.

Clean the lint filter before each load

to prevent lint

accumulation inside the dryer or in the room. 

DO NOT OPERATE THE DRYER WITHOUT THE LINT
FILTER IN PLACE, UNLESS THE DRYING RACK IS IN
USE. 

Always replace the lint screen when finished

using the drying rack.

Do not wash or dry articles that have been 
cleaned in, washed in, soaked in or spotted 
with combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.). These substances give
off vapors that may ignite or explode. Do not add
these substances to the wash water. Do not use or
place these substances around your washer or
dryer during operation.

Any article on which you have used a cleaning
solvent or that contains flammable materials
(such as cleaning cloths, mops, towels used in
beauty salons, restaurants or barber shops, etc.)
must not be placed in or near the dryer until
solvents or flammable materials have been
removed. There are many highly flammable
items used in homes such as acetone, denatured
alcohol, gasoline, kerosene, some household
cleaners, some spot removers, turpentines, 
waxes, wax removers and products containing
petroleum distillates.

The laundry process can reduce the flame
retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s 
care instructions.

Do not dry articles containing rubber, plastic 
or similar materials such as padded bras, tennis
shoes, galoshes, bath mats, rugs, bibs, baby pants,
plastic bags and pillows that may melt or burn.
Some rubber materials, when heated, can under
certain circumstances produce fire by
spontaneous combustion.

Do not store plastic, paper or clothing that may
burn or melt on top of the dryer during
operation.

Garments labeled

Dry Away from Heat 

or

Do 

Not Tumble Dry 

(such as life jackets containing

kapok) must not be put in your dryer.

Do not dry fiberglass articles in your dryer. 
Skin irritation could result from the remaining
particles that may be picked up by clothing
during subsequent dryer uses.

To minimize the possibility of electric shock,
unplug this appliance from the power supply 
or disconnect the dryer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning 
(except the removal and cleaning of the lint
filter). 

NOTE:

Turning the Cycle Selector knob 

to an 

OFF 

position does

NOT 

disconnect the

appliance from the power supply.

Do not spray any type of aerosol into, on or near
dryer at any time.

Do not place items exposed to cooking oils in
your dryer. Items contaminated with cooking oils
may contribute to a chemical reaction that could
cause a clothes load to catch fire.

Customer Service

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Customer Service

Tr

oubleshooting T

ips

Installation Instructions

Safety Instructions

Operating Instructions

Customer Service

Tr

oubleshooting T

ips

Installation Instructions

Safety Instructions

Operating Instructions

Summary of Contents for Spacemaker DCXH46





















































Reviews: