GE Spacemaker 7-5330 User Manual Download Page 7

EN

EN

10

Radio

9

Built-In AFC

The Built-In Automatic Frequency Control (AFC)
works only on FM. It helps to reduce drift on FM
reception and to keep the radio locked in on the
FM station to which it is tuned.

When tuning in FM stations, you may notice that
often the station you desire can be heard on two
or three nearby points on the dial.  Always tune
carefully to the loudest and clearest point.

Antennas

AM Antenna -

 A built-in ferrite rod antenna

eliminates the need for an outside antenna for
AM reception.

FM Antenna - 

The power cord acts as your FM

antenna.  The power cord picks up moderate to
strong stations and eliminates the need for an
external antenna in most strong signal areas.  Be
sure the power cord is stretched out to its full
length.  Do not coil or bunch the cord together.
Changing position of the power cord may
improve reception.

Turning on the Radio

Press 

BAND RADIO ON

 to turn on the radio.

Turning off the unit

Press 

OFF 

to turn off the radio.

Adjusting Volume

Press 

VOL - 

to decrease volume level.

Press 

VOL + 

to increase volume level.

Selecting Radio / TV Band

Press 

BAND RADIO ON

 to select between FM,

AM and TV band.

Tuning to a Station/Channel

Press 

TRACK / SEARCH / TUNE  

     to tune

down radio frequency or select the previous TV
channel.

Press 

TRACK / SEARCH / TUNE 

      to tune up

radio frequency or select the next TV channel.

Automatic Station/Channel Search

Press and hold 

TRACK / SEARCH / TUNE

       or

      for more than 1 second and release to start
automatic station/channel search in the direction
selected.

Search will stop once a station is found.

Note:

Note:

Note:

Note:

Note:

The display will return to the clock
time after displaying the station

fequency or channel number for a few
seconds. To view the current station
frequency or channel number, press 

TRACK /

TRACK /

TRACK /

TRACK /

TRACK /

SEARCH/ TUNE      

SEARCH/ TUNE      

SEARCH/ TUNE      

SEARCH/ TUNE      

SEARCH/ TUNE      

 or         .

Tips:

Tips:

Tips:

Tips:

Tips:

Press 

TRACK / SEARCH /TUNE

TRACK / SEARCH /TUNE

TRACK / SEARCH /TUNE

TRACK / SEARCH /TUNE

TRACK / SEARCH /TUNE

or        to quit automatic station/channel
search.

Radio Frequency Memory

1. Follow steps in “Selecting Radio Band” and

“Tuning to a Station/Channel” to tune to the
station you want to store into memory.

2. Press 

MEMO SET

 to assign the next available

memory location to the selected station.
P will flash with the next available memory
location light on the display

If you wish to assign another memory location
or overwrite a previously set memory, press

MEMO RECALL

 repeatedly to select the

memory location.

3. Press 

MEMO SET

 again to confirm selection.

• A Maximum of 10 preset memory locations

are available.

Memory Recall

Press 

MEMO RECALL

 repeatedly to recall preset

stations.

TV Band

CH 2-13 are available for TV Band.

The TV indicator and the channel number lights
on the display when TV band is selected.

ch 2    59.75 MHz

ch 3    65.75 MHz

ch 4    71.75 MHz

ch 5    81.75 MHz

ch 6    87.75 MHz

ch 7    179.75 MHz

ch 8    185.75 MHz

ch 9    191.75 MHz

ch 10  197.75 MHz

ch 11  203.75 MHz

ch 12  209.75 MHz

ch 13  215.75 MHz

TV Band

Using the Weather Band

Weather information is given continuously from
U.S. Government Weather Stations on frequencies
from 162.4MHz to 162.55MHz.

Important:

Important:

Important:

Important:

Important:

The listening range of NOAA
weather stations varies from 10 miles
up to a maximum of 40 miles from

the station’s transmitter.  In some areas of the
United States, weather transmissions cannot be
monitored.  The effective range of this radio will
have side variations due to the height of the
local transmitting antenna, atmospheric
conditions, and the terrain between the
transmitter and your radio’s location.

Radio

The Weather transmission, broadcast 24 hours a
day, are taped messages that are repeated every
4 to 6 minutes and revised and updated as
needed to match the changing weather
conditions.  For additional information, check
your location office of the National Weather
Service (Department of Commerce).

1. Press the 

INSTANT WEATHER 

     button to

access Weather Bands with strong signals to
the unit.
The Wx indicator and the channel number
lights on the display when weather band is
selected.

2.  Use the 

TRACK / SEARCH / TUNE    

   or

arrow buttons to select among the 7 weather
channels.

Note:

Note:

Note:

Note:

Note:

 You may not be able to receive

TV broadcast or weather band
information with this unit in some
areas of Canada. Please check with

your local TV broadcasters and weather
information services.

 ch 1   162.550 MHz

 ch 2   162.400 MHz

 ch 3   162.475 MHz

 ch 4   162.425 MHz

 ch 5   162.450 MHz

 ch 6   162.500 MHz

 ch 7   162.525 MHz

Weather Band

Summary of Contents for Spacemaker 7-5330











Reviews: