7 4 7
* # " (
D
Press key to toggle between small or large focal spot (0.1 or 0.3, respectively).
D
The readout indicates the size of the selected focal spot in the language
programmed at installation.
Note:
When magnification is selected, the system automatically selects the small focal
spot. When the standard exam is selected, the system automatically selects the
large focal spot.
If Stereotix 2 is installed, the large focal spot is automatically selected.
7 -72 7
/ ;,
86 6 7 -72+
D
In AEC mode and manual mode, press to select the focal track.
D
The readout indicates the type of focal track: molybdenum or rhodium.
Note:
In AOP mode, selection is automatic (pressing the key has no effect).
- 7
/ ;, ! # " <! =
D
In AEC and manual mode, the key selects one of the three filters.
D
The readout indicates the type of filter: Mo (molybdenum), Rh (rhodium) or Al
(aluminum).
Note:
Some filter/focal track pairs are inhibited as a function of kV values. The program
automatically selects an authorized filter and displays the selection.
Note:
In AOP mode, filter selection is automatic (pressing the key has no effect).
(The AOP mode does not select the AL filter).
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
