GE S2020 Technical Manual Download Page 118

Page: 118 / 302

Chapter 5

– Interfaces

GE Reason Switches

118

REASON SWITCHES-TM-EN-3



reload reload system;



send

send a message to other tty lines;



show

show running system information;



terminal set terminal line parameters;



veriphy veriphy keyword.

Each command has a menu inside with its own subcommands. The main menu

displayed, after typing the “?” character, is shown below.

Figure 73: Main menu at the SSH interface

If necessary, Reason Switches have an online help at this interface. Thus, when

typing a command plus “?” it will be displayed all allowed subcommands of a given

menu. For example, if it is necessary to view all IP interfaces configured at the
equipment, type first:

show ?

It will be displayed all of t

he options allowed at the show menu. “IP” menu will be

there. Then, type:

show ip ?

It will be displayed all of the options allowed at the IP menu. “interface” will be there.

Then, type:

Summary of Contents for S2020















































































































































































































































































































Search results

Summary of Contents for S2020

Reviews:

GE S2020, Technical Manual, Page: 118 / 302

Search results

Summary of Contents for S2020

Reviews: