GE RPV311, Technical Manual

Page: 65 / 295

RPV311 Chapter 4
– Configuration
RPV311-TM-EN-7 65
5 Power Circuit
Power circuits can be created of circuit voltage and current.
To add a new power circuit select the P
OWER
C
IRCUITS
section and fill in the following:
The I
DENTIFIER
text field allows user to enter a single code for the circuit being defined
(maximum 15 characters). No editing allowed;
The V
OLTAGE CIRCUIT
scroll box allows user to select a code of the voltage circuit to be
used;
The C
URRENT CIRCUIT
scroll box allows user to select a code of the current circuit to be
used.
Once the circuit is created, it shows in the configuration interface menu. When
selecting the circuit, a screen shows the characteristics of the circuit selected, as
shown in
Figure 24 . It is possible to edit the voltage or current circuit.
The frequency is calculated individually for each circuit as long as the magnitude of
the voltage is over 10% of the nominal magnitude configured in the Voltage Circuit
window. The frequency track occurs within the range of Nominal Frequency ±5Hz.
Figure 24: Adding and editing power circuits
The <R
ENAME
> button allows user to rename the circuit.
The <R
EMOVE
> button allows user to delete the circuit.