GE RPV311, Technical Manual

Page: 181 / 295

RPV311 Chapter 12
– RPV Tools
RPV311-TM-EN-7 181
1.5.2 Interface
When installing the RPV Tools, it creates a desktop icon for quick access. The
configuration interface can be accessed directly via this icon.
To access the configuration interface, do the following:
1. Click Start > Programs > Accessories > Command Prompt;
2. At Prompt, access C:\RPV\goosemon
_
config\resources;
3. Run the Goosemon _ Config.exe file and the application will open.
The initial screen of the GOOSE Configurator application is shown in Figure 81 and
has the following characteristics:
A The GOOSE's list the configuration files loaded. These files are divided into GOOSE
C
ONTROL
B
LOCK
, which are composed of datasets with binary elements that can be
associated with the digital channels of the RPV.
B The Digital channel of the RPV has the 320 binary magnitudes of the RPV, which
can be associated to GOOSE messages. These inputs shall be identified in the RPV.
C The buttons allow association or disassociation of a GOOSE C
ONTROL
B
LOCK
to a
digital input of the RPV.
D The S
TATUS
indicates the status of each operation.
Figure 81: Initial screen of the GOOSE Configurator
1.5.3 Configuration