11
10
Programming With Code Search
Retrieving Codes
1. Turn on the device you wish
to program.
2. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE
SEARCH.
3. Press and release the device
button for the device you are pro-
gramming (
TV, VCR
or
CABLE
).
The
INDICATOR LIGHT
will
blink once then remain lit.
4. Press and release
POWER
until
your device turns off.
Important:
You may have to press
POWER
up to 200 times.
5. When your device turns off,
press the
ENTER
button, the
INDICATOR LIGHT
will go off.
1. Press and hold
CODE SEARCH
until the
INDICATOR LIGHT
lights, then release
CODE
SEARCH.
2. Press and release the device
button for the device’s code you
are retrieving (
TV, VCR
or
CABLE
). The
INDICATOR
LIGHT
will blink once then
remain lit.
3. Press and release
CODE
SEARCH
. The
INDICATOR
LIGHT
will turn off.
4. Starting with
0
on the keypad,
press the number buttons in
order (
0-9
) until the
INDICATOR
LIGHT
blinks.
5. The number which causes the
INDICATOR LIGHT
to blink is
the first digit of your code.
6. Repeat step 4 until you have
retrieved all three numbers in
the code.
ENTER
0
9
BLINK
BLINK
OFF
If your TV, VCR, or Cable Box does not respond after you have
tried all the codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
If you need to find the three-digit code for your TV, VCR or
Cable Box after your device is set-up using Code Search, use
this procedure.
CODE SEARC
…
VCR
TV
CABLE
OFF
POWER
INDICATOR
LIGHT
VCR
TV
CABLE
CODE SEARCH
CODE SEARCH
INDICATOR
LIGHT
The AUX Button
1. Manually turn on the the device
you wish to assign to the
AUX
button (TV, VCR or Cable Box).
2. Press and hold the
CODE
SEARCH
button until
the
INDICATOR LIGHT
lights, then release the
CODE SEARCH
button.
3. Press and release the
AUX
button. The
INDICATOR LIGHT
will blink.
4. Find the three digit code for the
device you wish to program in
the code list
Device
Page
TV ................................4
VCR ..............................6
Cable Box ....................9
Enter the code using the
Number Buttons.
After your code is entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at your device
and press the
POWER
button.
Your device should turn off.
Note: If your device does not respond,
try all the codes for your brand. If the
codes do not work, or your brand is
not listed, try the Code Search method
on page 11.
6. With your device on, press
CHANNEL UP
. If the device
responds, no further
programming is required.
8. Enter your code here
for easy reference.
OFF
BLINK
The AUX Button allows you to assign another TV, VCR or Cable
Box to be controlled.
AUX CODE
RCH
AUX
CODE SEARCH
POWER
R
CHAN
A¥B
SLEEP
1
2
3
4
5
6
7
8
9
0
INDICATOR
LIGHT
RM94902 manual 11/1/04 2:48 PM Page 10