Clearing A Learned Button
To clear a learned button sequence, use the procedure
below. Note: No functions may be stored under the
LEARN, SETUP,
or any of the device buttons.
1. Press and hold the
SETUP
button
until the
INDICATOR LIGHT
lights, then release the
SETUP
button.
2. Press and release the desired
Mode button (
TV, VCR, DVD
,
etc. . . ). The
INDICATOR
LIGHT
will blink off once the
button press is accepted.
3. Press and release the
LEARN
button twice. The
INDICATOR
LIGHT
will light off once the
button press is accepted.
4. Press and release the
SETUP
button and the remote will
return to original operation
mode. All learned command
functions under the device are
now cleared.
Clearing All Learned Buttons
This procedure will erase all learned functions in every
device mode. This step is recommended when attempting
any learning of a new function from a new remote.
1. Press and hold the
SETUP
button until the
INDICATOR
LIGHT
lights, then release the
SETUP
button.
2. Press and release the
LEARN
button twice. The
INDICATOR LIGHT
will
light off once the button
press is accepted.
3. Press and release the
SETUP
button and the remote will
return to original operation
mode. All learned com-
mand entries are now cleared.
10
