GE RHM 30, Specifications, Page: 5 / 8

5
Pressure Rating RHM 30
The maximum pressure (pmax) of a sensor is determined by its weakest part. The weakest part can be the measuring
loops (pmax indicated below) or the construction type (pmax indicated in the Basic Order Code section, last page) or the
selected flanges / fittings (for pmax please see respective standard).
pmax of P1 measuring loops
M3 optional material - 2.4602 (Alloy C22)
OD x WT 33.4 x 2.8 mm (1.32 x 0.11 in)
bar °C psi °F
271 50 3931 122
239 120 3466 248
204 210 2959 410
170 350 2466 662
pmax of P1 measuring loops, standard
M1 standard material - 1.4571 (316Ti)
OD x WT 33.7 x 2 mm (1.33 x 0.08 in)
bar °C psi °F
137 50 1987 122
123 120 1784 248
106 210 1537 410
89 350 1291 662
pmax of P2 measuring loops
M1 standard material - 1.4571 (316Ti)
OD x WT 33.7 x 4.55 mm (1.33 x 0.18 in)
bar °C psi °F
334 50 4844 122
299 120 4337 248
258 210 3742 410
217 350 3147 662
pmax of P3 measuring loops
M1 standard material - 1.4571 (316Ti)
OD x WT 33.7 x 6.35 mm (1.33 x 0.25 in)
bar °C psi °F
490 50 7107 122
438 120 6353 248
378 210 5482 410
319 350 4627 662