manualshive.com logo in svg

GE RHM 20, Specifications

Share
Download
GE RHM 20 Specifications Download Page 7

7

General Specifications RHM 20

Temperature Range

•  NT Models from -20 to +120°C (-4 to +248°F)

•  ET Models from -45 to +120°C (-49 to +248°F)

•  ET2 Models from -45 to +210°C (-49 to +410°F)

•  ET1 Models from -196 to +50°C (-320 to +122°F)

•  HT Models from 0 to 350°C (+32 to +662°F)

(Heating for housing optional, please consult your local agent)

Electrical Connection

•  Junction box Aluminium coated (standard). Junction box in 

SS 316Ti optional

•  Cable entry M25 x 1.5. Optional cable entries M20 x 1.5, 1/2” 

NPT or 3/4” NPT

•  Max cable length between RHM and RHE is 100m (330 ft). 

200m (660 ft) only with factory approval

Material of Wetted Parts

•  1.4571 / SS 316 Ti / UNS S31635 (standard)

•  2.4602 / Alloy C22 / UNS N06022

•  Tantalum

•  Others on request

Sensor Enclosure/Housing

•  Stainless Steel 1.4301 / SS 304, optional in 1.4571 / SS 316Ti. 

Others on request

•  Protection Class IP 65. Optional IP 66 / NEMA 4x

Approvals

•  ATEX Ex II 1 G, EEx ia IIC T6-T1

•  CSA USA-Canada, Class I, Div. 1, Groups A, B, C, D

•  PED according to directive 97/23/EC: Art.3 (3) Sound 

Engineering Practice (SEP), Module A1 or Module B + C1 – 

depending on construction type and measured fluid

•  Others on request

Summary of Contents for RHM 20









Reviews:

No comments

Brands by name

Popular brands

Load more brands