GE RHM 15, Specifications

Page: 5 / 8

Pressure Rating RHM 15
The maximum pressure (pmax) of a sensor is determined by its weakest part. The weakest part can be the measuring
loops (pmax indicated below) or the construction type (pmax indicated in the Basic Order Code section, last page) or the
selected flanges / fittings (for pmax please see respective standard).
pmax of P1 measuring loops, standard
M1 standard material - 1.4571 (316Ti)
OD x WT 15 x 1 mm (0.59 x 0.039 in)
bar °C psi °F
165 50 2393 122
150 120 2176 248
127 210 1842 410
107 350 1552 662
pmax of P2 measuring loops
M1 standard material - 1.4571 (316Ti)
OD x WT 15 x 2 mm (0.59 x 0.079 in)
bar °C psi °F
352 50 5105 122
300 120 4351 248
250 210 3626 410
210 350 3046 662
pmax of P3 measuring loops
M1 standard material - 1.4571 (316Ti)
OD x WT 15 x 3 mm (0.59 x 0.118 in)
bar °C psi °F
540 50 7832 122
450 120 6527 248
350 210 5076 410
300 350 4351 662
pmax of P1 measuring loops
M3 optional material - 2.4602 (Alloy C22)
OD x WT 15 x 1 mm (0.59 x 0.039 in)
bar °C psi °F
228 50 3307 122
201 120 2915 248
172 210 2495 410
143 350 2074 662
pmax of P2 measuring loops
M3 optional material - 2.4602 (Alloy C22)
OD x WT 15 x 2.2 mm (0.59 x 0.087 in)
bar °C psi °F
540 50 7832 122
477 120 6918 248
407 210 5903 410
339 350 4917 662
5