14
15
Removal
1.
Pull the drawer out to obtain the ice cubes.
2
.
To fill the ice trays, remove the cassette as shown.
Ice Factory
4
Filling
3.
Lay the cassette on a flat surface as shown, so that the ice
trays face up.
4.
Pour water into each tray.
5.
With the knobs facing you, raise the cassette slowly to a
vertical position as shown.
6.
Return the cassette to the Ice Factory by sliding it slowly
along the tracks, until it is securely in place.
Dumping the Ice
7.
Turn or twist each knob clockwise until ice cubes fall into the
drawer on the bottom. The drawer can store a maximum of 3
full trays of cubes.
BE SURE TO WIPE AWAY ANY EXCESS OF WATER.
4. CARE AND CLEANING
• Never use toxic, abrasive products or fibers that can damage the surface of the
product.
• Use a soft sponge or damp cloth with a neutral soap. Rinse and dry with a clean
and dry cloth. For cleaning the inside you can also use a solution of one spoon
of sodium bicarbonate with two liters of warm water.
• Do not use sharp or pointed objects that can scratch the refrigerator, interior
shelves or bins.
• When cleaning shelves, dry any excess water.
• To clean the condenser use a brush, cloth or sponge to eliminate dust
accumulation. Do this at least every six months.
Stainless steel refrigerators have a protective film on doors to avoid stains,
fingerprints.
To clean, use a damp cloth and neutral soap.
Do not use other cleaning products because they can damage your stainless steel.
Refrigerator Cleaning
