2.
Verify that the gasket is present and properly seated in the bezel channel located on
the sides of the unit.
3.
Insert the QuickPanel
+
into the mounting panel cutout.
4.
Insert the hook of the mounting bracket into the mounting hole as displayed in the
following figure.
5.
Tighten the screws on the mounting bracket in a clock-wise direction.
Torque Range for Mounting Clamp Screws
Unit
Torque Range
IC755CxW07CDx
0.3 Nm (2.66 in-lb)
IC755CxS10CDx
0.7 Nm (6 in-lb)
IC755CxS12CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
IC755CxS15CDx
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
32
GFK-2847F
Qui Operator Interface User Manual
For public disclosure
Summary of Contents for QuickPanel+
