GE QuickPanel+ IC755CxS06RDx, User Manual, Page: 76 / 118

76 GFK-2847W
For public disclosure
QuickPanel
⁺
Operator Interface User
Manual
5.7 Connectors
5.7.1 Power Connector Pin-out for IC755CxS06RDx, IC755CxW07CDx, and
IC755CxSxxCDx
Note Refer to the section Connecting Input Power .
Connector: Terminal Euro (Tyco Electronics 284539-3)
Mating Connector: (Tyco Electronics 284510-3)
Pin # Signal Name
Pin-out
1
+24 V dc
†
1 3
2 GND
3 FG
†
IC755CxSxxCDx supports both +12 V dc or +24 V dc IN
5.7.2 Ethernet for IC755CxS06RDx, IC755CxW07CDx, and IC755CxSxxCDx
Note Refer to the section Ethernet Port LED Operation .
The QuickPanel
+
display is equipped with 10Base-T/100-Base-TX Ethernet port(s). Connect an Ethernet network cable
(unshielded-twisted pair, CAT 5) to the unit through the RJ-45 connector(s) on the bottom of the enclosure. LED indicators
on the port indicate channel status. The port can be accessed by Windows Embedded Compact 7 network
communications or by your application.
5.7.2.1 Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Pin #
Signal Name
Pin-out
1 TX+
Yellow
Green
8 1
2 TX-
3 RX+
4 NC
5 NC
6 RX-
7 NC
8 NC
Note Dual Ethernet ports are separate ports (only applicable to QuickPanel
+
IC755CxSxxCDx 10, 12, and 15" display units)