GE PTAN9150MWW, Technical Service Manual

Page: 14 / 54

14
HydroSoft
TM
Infusor
TM
Washer Tips
INTRODUCTION
HydroSoft
TM
model washers use an Infusor
TM
, not a traditional agitator. Infusor wash
technology provides excellent cleaning. Infusor models are ENERGY STAR® qualified
using only 23 gallons of water per (super) load compared to 48 gallons for a similar
load with a standard machine .
High efficiency (HE) detergent is required with Infusor models. Liquid HE detergents
dissolve faster in water. For best performance, load the machine by adding liquid HE
detergent first. Add the dirtiest clothes around, but not covering, the center of the
Infusor, then add the remaining clothes. Do not load clothes higher than the line
indicated on the balance ring at the top of the wash basket. Insert items as per the
Use and Care. Select proper load size, water temperatures, and rinse options. Use a
fabric softener for better performance
.
Infusor models turn the washer basket at slow speed during fill to allow the fill funnel
to evenly coat the wash load with water and push clothes to the bottom. The lid will be
locked during the fill to evenly wet the clothes. If you wish to add or remove an item,
press the Start/Pause button to pause the washer. The lid will unlock once the basket
has come to a complete stop. This is for your safety.
Infusor models spin at up to 700 RPM. This extracts more water during the spin cycle,
compared to a standard machine, and minimizes drying time. If wrinkling is a concern,
use a lower spin level to shorten the spin duration.
Given that Infusor washers operate differently from standard top-load machines,
consumers may comment on lint, lower water levels, washing differently than
expected, spots on clothing, wrinkling, water temperature, vibrating/shaking, too-wet
clothes, unusual sounds, or loose tub/basket.
Take the time to listen carefully and fully understand the consumer’s specific issue
before proceeding. Address the appropriate issue today to avoid a return service call.