Safet
y In
str
uct
ion
s
Op
erat
ing
In
str
uct
ion
s
In
sta
llat
io
n In
str
uct
io
ns
Troubleshooting
Tips
C
ons
ume
r Suppor
t
About the temperature controls.
Not all features are on all models. Your controls will look like one of the following:
45
NOTE:
The refrigerator is shipped with protective film
covering the temperature controls. If this film was not
removed during installation, remove it now.
Non-LCD models
LCD models
To run your refrigerator:
Connect the power supply.
Select the temperature control (to adjust the temperature of
your refirgerator in accordance with the amount of your food
and climate of your city. The temperature controls are preset
in the factory at 3˚C (37˚F) for the refrigerator compartment
and -18˚C (0˚F) for the freezer compartment. Allow 24 hours
for the temperature to stabilize to the preset recommended
settings.
Refrigerator temperatures can be adjusted between 1
˚C and
7˚C (34˚F to 44˚F), and the freezer temperatures can be
adjusted between -21˚C and -14˚C (-6˚F to 6˚F).
Note:
The products marketed in the Andean Countries
have been evaluated under the following ranges of
temperature:
ST
(Subtropical) between 18
˚C and 38˚C.
T
(Tropical) between 18
˚C and 43˚C.
To change the Refrigerator room temperature:
LCD Models:
Access By:
Home > Refrigerator
Activated By:
Using the arrows to select the desired
temperature.
To change the Refrigerator room temperature:
LCD Models:
Access By:
Home > Refrigerator
Activated By:
Using the arrows to select the desired
temperature.
You must press
ENTER
to set the new temperature.
Once the desired temperature has been set, the display will
return to the
HOME
screen and show the set temperatures
underneath the actual temperature display for several
seconds. Several adjustments may be required. each time
you adjust the controls, allow 24 hours for the refrigerator to
reach the temperature you have set.
Non-LCD Models:
To change the temperature, press and release the
WARMER
or
COLDER
pad. The
SET
light will come on and the display
will show the set temperature. To change the temperature,
tap either the
WARMER
or
COLDER
pad until the desired
temperature is displayed
.
To adjust the
Actual Temp Control
temperature, first press
the
Freezer (Temperature)
or
Refrigerator (Temperature)
button. Then press
WARMER ( )
or
COLDER ( )
to
increase or decrease temperature to the desired setting.
Once the desired temperature has been set, the temperature
display will return to the actual refrigerator and freezer
temperatures after 5 seconds. Several adjustments may be
required. Each time you adjust the control, allow 24 hours for
the refrigerator to reach the temperature you have set. The
temperature controls can display both the
SET
temperature as
well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the temperature
based on usage and operating enviroment.
Turning the cooling system off:
LCD models:
Turning the
cooling system OFF
stops cooling
in both the freezer and refrigerator compartments, but does not
shut off electrical power to the refrigerator.
Non-LCD models:
Setting either or both controls to
OFF
stops
cooling in both the freezer and refrigeartor compartments, but
does not shut off electrical power to the refrigerator.
LCD Models:
Access By:
Home > Options > Information and Settings >
Cooling System Off
To return the cooling system back on, press the touch screen
and press the
ON
button.
Activate by:
Pressing
ENTER
.
Non-LCD Models:
Tap the
WARMER
pad for either the refrigerator or the freezer
until the display shows
OFF
. To turn the unit back on, press the
COLDER
pad for either the refrigerator or freezer. The
SET
light
will illuminate on the side you selected. Then press the
COLDER
pad again (on the side where the
SET
light is illuminated) and it
will go to the preset points of -18˚C (0˚F) for the freezer and 3˚C
(37˚F) for the refrigerator.
Setting the
Actual Temp Control
to 0 stops cooling in both the
freezer and refrigerator compartments, but does not shut off
electrical power to the refrigerator.
When the unit is turned back on, it will take up to 24 hours to
stabilize.
Actual Temp Control
Actual Temp Control
Summary of Contents for PSMF2LEB
Page 2: ......
Page 43: ...41 Notas ...
Page 85: ...Colombia Dentro de Bogotá 571 489 7900 Fuera de Bogotá 01800 051 6223 83 ...
