ForanswerstoyourMonogram,
®
GEProfile
™
or
GE
®
appliancequestions,visitourwebsiteat
ge.comorcallGEAnswerCenter
®
service,
800.626.2000.
210222
Specification Created 2/08
Listed by
Underwriters
Laboratories
Collar Trim Installation
Anenclosureisrequiredtomatchuptothe
trim,seeTypicalInstallation.Toobtainthe
mostintegratedlook,thecabinetorsoffit
abovetherefrigeratorshouldextendout
tothesamedepthasthesidepanels.The
refrigeratoropeningmusthaveminimum
dimensionsof72-1/2"highx36-1/8"wide
x24-1/2"deepasshownatright.Ifthereis
anoverheadcabinet,allow1"forcabinet
doorclearancewiththetoptrimpieceso
thecabinetdoorscanbeopenedwithout
hittingthetoptrim.If1/2"sidepanelsare
used,thensidetrimandpanelwillbeeven.
If3/4"sidepanelsareused,thensomeof
thesidepanelwillextendbeyondthetrim
andmustbefinished.
IMPORTANT:
Beforefinalizingspecifications
foryourGEProfileCounter-Depth
Refrigerator,pleaseNOTE:
•Aminimumof36-1/8"isrequiredfor
refrigeratorinstallationwithcollar
•Besuretoallowfor1/2"or3/4"side
panelsinadditiontothe36-1/8"
minimum.
Typical Installation
Shadedareasrepresentfrontsurfacesofsidepanelsand
overheadcabinetorsoffitthatcontactstrim.
Refer collar trim install
70-1/2"*
36-1/8"
24-1/2"*
1/2" minimum
*The rough-in dimension of 72-1/2" is minimum and is measured from the
finished floor to top of opening (or the underside of the overhead cabinets).
For Models with Trim Kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (72-5/8") to
height of opening to allow additional clearance between cabinet doors and
top of refrigerator trim when cabinet doors are in open position.
Collar Trim Installation Art
Rough-In Dimensions and Installation Information (in inches)
Magnetic
Tape
3/4" Cabinet
Side Panel
1/2" Cabinet
Side Panel
Side trim must be installed
flush with the gasket contact
surface on the case.
Refrigerator
Case
Side Trim
Door Gasket
Overhead
Cabinet
Cabinet
Door
Top Trim
Case
1"
PSJC5YGX
GEProfile
™
Counter-Depth
24.6Cu.Ft.Side-By-SideRefrigerator
