background image

16

Installation Instructions

6   INSTALL MOUNTING SCREWS

‡

  Slide the oven the remaining way into the opening 

so that the side flanges and control panel are 

against the cabinet frame. Make sure that the oven 

is centered in the opening.

‡

  Open the door, place a turntable tray in the oven 

and make sure that the tray in the unit is level.

‡

 Drill pilot holes through the side flanges.

‡

  Drive the color-matched screws into the side 

flanges. It is recommended that the screws  

be hand tightened.

If installing oven with an accessory storage 

drawer:

‡

  Open the drawer.

‡

  Drill pilot holes through the side flanges.

‡

  Drive color-matched screws into the side flanges.  

It is recommended that the screws be hand 

tightened.

NOTE: 

If installing the Profile Advantium 120V Oven 

with an accessory storage drawer, you must use  

the Under-the-Counter (UTC) mounting bracket for  

the drawer. 
If installing the Monogram Advantium integrated 

model ZSC1201 above 36

s

, the UTC mounting bracket 

for the accessory storage drawer must be used.

7  FINALIZE INSTALLATION

‡

  Turn power on at the source. The interior light 

should come on when the door is opened.

‡

  Refer to Owner’s Manual for operating instructions.

4   INSTALL BOTTOM TRIM

CAUTION:

 

If installing the Advantium 

120V Oven below 36

s

, you must use the 

plastic

 

bottom trim due to burn risk to children. The plastic 

trim acts as insulation and will help prevent burns 

to children from hot surfaces.

PRECAUCIÓN:

 

Si va a instalar el horno 

Advantium de 120V debajo de 36”, usted debe utilizar  

el reborde inferior 

plástico

 debido al riesgo de 

quemaduras para los niños. El reborde plástico  

actúa como aislante y evitará que los niños sufran 
quemaduras provocadas por las superficies calientes.

NOTE: 

If installing the Advantium 120V Oven  

with an accessory storage drawer, the bottom trim 

is not required. Proceed to Step 5.

‡

 

 Installation  Below  36

s

, align trim tabs on the plastic 

trim to slots in the bottom of the oven.

‡

  

Installation Above 36

s

, align trim tabs on the plastic 

or metal trim to slots in the bottom of the oven.

‡

  Secure the bottom trim to the bottom of the oven 

using 3 screws provided. 

5   INSTALL BOTTOM TRIM WITH 

ACCESSORY DRAWER

If installing with an accessory drawer, see 

installation instructions on page 17 or instructions 

that come with the accessory drawer.

Metal 

Trim

Plastic 

Trim OR

Plastic 

Trim 

Summary of Contents for PSB9120





















Reviews: