5
HOME SCREEN
The Home screen is the main display
screen. If you do not press any buttons for
30 seconds, the thermostat will return to
the Home screen.
The large temperature reading on the
Home screen is the current temperature.
The small temperature reading is your
setpoint temperature.
To quickly change the setpoint
temperature:
Press UP or DOWN.
Note:
The utility company will override
your manually input setpoint when the
unit is set to accept events.
When you receive an event or message from the utility company, ‘Event’
or ‘Message’ appears on the bottom of the Home screen and advises how
many events or messages you have received, and the event’s level of
importance.
THU APR 15 4:30A
HEAT
FAN AUTO
NIGHT
F
62
80
Event (4)
Message (3)
SET HEAT/COOL MODE
1. When you are in the HOME SCREEN,
press PREV and the screen opposite
appears.
2. Press UP or DOWN to select one of the
following options:
• “Heat”, “Cool” or “Off” (Conventional HAVC)
• “Heat”, “Emer” (Emergency Heating), “Cool” or “Off” (Heat Pump HVAC)
3. Press MENU or wait 5 seconds to confirm your selection and return to
the Home Screen.
THU APR 15 4:30A
HEAT
FAN AUTO
NIGHT
F
62
70
THU APR 15 4:30A
HEAT
FAN AUTO
NIGHT
F
62
70
SET FAN MODE
1. When you are in the HOME SCREEN,
press NEXT and the screen opposite
appears.
2. Press UP or DOWN to select “Fan On” or
“Fan Auto”.
3. Press MENU or wait 5 seconds to confirm your selection and return to
the HOME SCREEN.
NOTE:
When the fan is set to AUTO it only runs when the heating/cooling
system is running.
THU APR 15 4:30A
HEAT
FAN
NIGHT
F
62
70
AUTO
Summary of Contents for PROGRAMMABLE THERMOSTAT
Page 1: ...49 50276 03 11 GE PROGRAMMABLE THERMOSTAT Operating Instructions and Limited Warranty ...
Page 17: ...17 Notes ...
Page 23: ...23 Notes ...
Page 24: ...24 Notes ...
