10
9
8
5
4
7
Guide the wire down into the blower opening
so it rests securely in front of the blower.
Replace the blower plate in the same position
as before with the screw.
Attach the exhaust adaptor to the rear of the
oven by sliding it into the guides at the top
center of the back of the oven.
AFTER: Fan Blade
Openings Facing Back
6
Place the blower unit back into the opening.
Roll the blower unit 90° so that fan blade
openings are facing the front of the microwave.
ADAPTING MICROWAVE
BLOWER FOR OUTSIDE
BACK EXHAUST (cont.)
B5.
17
Rotate blower unit counterclockwise 180°.
Before Rotation
After Rotation
Gently slip the wire through the gap between the
two tabs on the top of the blower so the wire is
behind the tabs.
Before Rerouting
After Rerouting
Back of
Microwave
Back of
Microwave
Blower Plate
Blower Motor
Screw
Secure the blower unit to the microwave with
the screw from Step 1.
Before Rolling
After Rolling
Back of
Microwave
End A
End B
Back of
Microwave
Back of
Microwave
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.
NOTE: The blower unit exhaust
openings should match exhaust openings
on rear of microwave oven.
Installation Instructions
Guide
Guide
Adaptor
Back of
Microwave
3
