GE Profile PVP6004, Use & Care Manual

Page: 17 / 28

17
Very important: Read this manual thor-
oughly before using the cooktop. This
manual is designed so that the texts relate to
the corresponding illustrations.
0. Identification
Identify the model of your cooktop ("a", "b", "c", "d" or "e") by comparing the number and lay-
out of the elements on your appliance with that shown in the illustrations.
1. Installation
1.1 Unpacking. Remove all the protective
materials.
1.2 Insertion into the unit. Always take into
account the details on the characteristics
plate (1.2.1) and the measurements of the
unit into which the cooktop is going to be in-
serted (1.2.2, 1.2.3). If you are not going to fit
an oven beneath the cooktop, you must in-
stall a protective panel in accordance with
the indicated dimensions (1.2.4). Stick the
foam join along the outer edge of the cook-
top to make it watertight (1.2.5). Turn the
cooktop over and insert it into the hole
(1.2.6). Secure it to the unit with the four
hooks supplied (1.2.7). Do not use non-re-
movable materials such as silicone.
1.3 Connection to the power supply. The
cooktop is supplied with a power cable.
• Prepared for a 230 V~ cooktop. (1.3.1)
• Prepared for a 220-240V~ cooktop: see
table. (1.3.2)
• Total power: 60 cm cooktop 6.8 kW
220-240 V ~
60 cm Cooktop Nominal switch by phases
30 A
220-240 V 3~
60 cm Cooktop Nominal switch by phases
14 A
• If the type of connection is different than
220- 240 V~, remove the cable and make
the connection as per diagrams (1.3.3)
380-415 V 3N~
60 cm Cooktop Nominal switch by phases
11 A
380-415 V 2N~
60 cm Cooktop Nominal switch by phases
16 A
This appliance is compliant with European
directives 73/23/EEC and 89/336/EEC.
Recommendation: The cooktop must be in-
stalled by an authorized installer, who shall
follow the manufacturer’s instructions and
diagrams.