PSB48LGR – GE Profile
™
48" Built-In Side-By-Side Refrigerator with Electronic Dispenser
Specification Revised 12/06
210321
.250 + .750 = 1.000 Maximum Total Panel Thickness
3/4" Custom Panel Dimensions
For a more custom appearance, 3/4" framed custom panels may be installed on trimmed
models. The overlay panel is secured to a 1/4" finished back panel. The custom panel then
slides into the trim. Please see installation instructions for detailed information.
Custom Panel
Backer Panel
NOTE:
Left-to-right offset is not always equal
to top-to-bottom offset.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
1/4" Framed Panel Dimensions
If you choose to install framed panels, they must be cut to the dimensions shown.
The panels will slide into the frame on the door and grille.
ImPORTANT NOTE:
Maximum weight for Fresh Food panel is 70 pounds
and 30 pounds total for Freezer panels.
1/4"
Panel
Door
5/16"
Trim
Reveal
E
D
F
A
B
Grille Panel
C
Dispenser
Cutout
Freezer
Panel
Fresh Food
Panel
G
ImPORTANT NOTE:
Dispenser Trim
The refrigerator is supplied with factory installed dispenser trim.
• If panel is less than 1/4" thick, a noticeable gap will be
created around the dispenser trim.
Foam tape may be applied on the door to improve the fit.
• If panel is more than 1/4" thick, the panel will not fit behind
the trim.
1/4" Front Panel Dimensions (in inches)
A
B
C
D
E
F
G
4
8" Models 45-31-32 10-3/4 67-7/8 18-15/32 26-15/32 17-5/8
35-5/32
3/4"
Custom
Panel
1/4"
Backer
Panel
Door
3/4"
