Bridge Surface Element with Selector Knob
(on some models)
You can create an oblong heated area by using
the left rear element in addition to the front
element bridge combination.
Make sure the pan rests flat on the glass
cooktop.
When the
SELECTOR
knob points to
,
the control knob controls both the left
front surface element and the bridge area.
Choose pans that match the
circle/bridge area as closely as possible.
When the
SELECTOR
knob points to
,
the control knob controls the left front
surface element only.
Bridge Surface Element without Selector Knob
(on some models)
Make sure the pan rests flat on the glass
cooktop.
To use the bridge element, push and
turn the control knob to
, stopping at
the desired settings.
Choose pans that match the
circle/bridge area as closely as possible.
To use the left front surface element only,
push and turn the control knob to
,
stopping at the desired settings.
OFF
HI
8
8
6
6
4
4
2
2
SIM
MER SIMME
R
Dual Surface Element with Selector Knob
(on some models)
To use the large surface element, turn
the
SELECTOR
knob to
. Push in and
turn the control knob to the desired
setting. The element will heat the entire
area contained by the larger circle.
To use the small surface element, turn
the
SELECTOR
knob to . Push in and
turn the control knob to the desired
setting. The element will only heat
the area inside the smaller circle.
8
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
Using the surface elements.
Tri-Ring Surface Element with Selector Knob
(on some models)
To use the largest cooking area, turn the
SELECTOR
knob to
. Push and turn
the control knob to the desired setting.
To use the medium cooking area, turn
the
SELECTOR
knob to
.
Push down and turn the control knob to
the desired setting.
To use the smallest cooking area, turn
the
SELECTOR
knob to . Push and turn
the control knob to the desired setting.
This will activate only the smallest inside
heating area.
LO
Small
surface
element
setting
Large
surface
element
setting
Dual Surface Element without Selector Knob
(on some models)
To use the small surface element, turn the
control knob to the
settings.
To use the large surface element, turn the
control knob to the
settings.
OFF
HI
8
8
6
6
4
4
2
2
LO
LO
The dual surface element has 2 cooking sizes to select from so you can match the size of the element to the size of the cookware you are using.
The Tri-Ring surface element offers 3 cooking areas to match the size of the cookware you are using.
