22
49-2001047 Rev. 5
Troubleshooting Tips ...
%HIRUH\RXFDOOIRUVHUYLFH
Problem
Possible Cause/Solution
Surface burners do not light or do not
light fully.
Ensure any gas supply valves and propane tank valve are opened.
Ensure knob is pressed and set to the HI position while the ignition
knob is turned.
Gas pressure is either too low or too high.
%XUQHUSRUWVRULJQLWHUDUHGLUW\5HIHUWR%XUQHU+HDGVLQWKH&DUHDQG
Cleaning section.
%DNHEXUQHUGRHVQRWOLJKW
Ensure gas supply valves and propane tank valve are opened.
(QVXUHRYHQFRQWURONQRELVSUHVVHGDQGVHWWRWKHIODPHSRVLWLRQ
while the ignition knob is turned. Turn the ignition knob until the pilot
LVOLW.HHSWKHRYHQFRQWURONQRESUHVVHGIRUDOHDVWVHFRQGVWR
allow time for the oven pilot to light and for the pilot sensor to become
heated. If air is in the gas line, this process may take over a minute.
Gas pressure is either too low or too high.
Flames are completely or mostly yellow
or orange.
1RUPDOIODPHVPD\VKRZVLJQVRIDQRUDQJHWLQWZKHQZHOOKHDWHGRUVLJQV
of flickering orange due to dust particles in the gas or air.
Gas pressure is too low.
%XUQHUSRUWVDUHGLUW\5HIHUWR%XUQHU+HDGVLQWKH&DUHDQG
Cleaning section.
.QREEDFNOLJKWLQJGRHVQRWWXUQRQ
when light button is pressed.
(QVXUHXQLWLVFRQQHFWHGWR9'&6HH(OHFWULFDO&RQQHFWLRQLQWMH
Installation Instructions.
LED board or switch needs to be replaced. Contact GE Appliances for
service.
Oven light does not turn on when light
button is pressed.
(QVXUHXQLWLVFRQQHFWHGWR9'&5HIHUWR(OHFWULFDO&RQQHFWLRQLQ
the Installation Instructions.
2YHQEXOEQHHGVWREHUHSODFHG5HIHUWR2YHQ/LJKWLQWKH&DUHDQG
Cleaning section.
TROUBLESHOOTING TIPS
