Consumer
S
uppor
t
Tr
oubleshooting
Tips
Operating
Instructions
Safety
Instructions
Installation
Instructions
About the washer features.
NOTE:
Features may not be available on all washer models.
Cycle Signal
Use the
SIGNAL
button to change the
volume of the end of cycle signal.
Press the button until you reach the
desired volume.
Soak
Soak is an extra wash before the main
wash. Use it for heavily soiled clothes or
for clothes with a care label that
recommends soaking before washing.
Be sure to add high-efficiency detergent,
or the proper wash additive to the soak
dispenser.
NOTES:
• When selecting soak, it is
recommended to use powder
detergent in the main wash (detergent)
compartment.
• The maximum soak time is 3 hours.
Extra Rinse
Use an extra rinse when additional rinsing
is desired to remove excess dirt and
detergent from soiled loads.
Delay Start
You can delay the start of a wash cycle
for up to 24 hours. Press the
DELAY START
button to choose the number of hours
you want to delay the start of the cycle,
then press the
START
button. The machine
will count down and start automatically at
the correct time.
NOTE:
If you open the lid when the delay
is counting down, the machine will enter
the pause state. You must close the lid and
press
START
again in order to restart the
countdown.
MY CYCLE
To save a favorite cycle, set the desired
settings for wash cycle, soil level, spin
speed and wash temp settings and hold
down the
MY CYCLE
button for 3 seconds.
A beep will sound to indicate the cycle has
been saved.
To use your custom cycle, press the
MY CYCLE
button before washing a load.
To change the saved cycle, set the desired
settings and hold down the
MY CYCLE
button for 3 seconds.
NOTE:
When using
MY CYCLE
, wash
options cannot be modified after the cycle
has been started.
NOTE:
If you change wash options with
MY CYCLE
before starting the cycle, the
MY CYCLE
light will turn off and you will
be returned to the base cycle.
6
