22
Level IV Viewing History - H Values
Historical information can be viewed by pressing the SET
and DOWN buttons simultaneously with the Analyzer
control in the home position. Release both buttons when
the control displays an “H” value. Press the UP or DOWN
buttons to navigate to each setting.
H#
Description
Range
Notes
H0
Resin Volume: Cubic Feet Liters
0.25 –3.00
5 - 100
Resin Volume
H1
Days since last regeneration
0 - 255
H2
Average Number of Days Between Regenerations
0 – 99 days
Last 4 regenerations
H3
Calendar Adaptive Override Days
0 - 30 days
H4
Number of regenerations since last reset
0 -65536
H5
Total amount of salt used since last reset
0 - 999900 Lbs or Kg
H6
Number of regenerations due to Calendar Override
0 - 65536
H7
Number of Low Salt Alarms since last reset
0 - 65536
H8
Number of Reduced Capacity Alarms since last reset
0 - 65536
H9
Months since unit last serviced
0 - 255
Holding the set key down for three seconds while H4 (number of regenerations since last reset) is being displayed
will reset the numbers stored in H4, H5, H6, H7 and H8. Holding the set key down for three seconds while H9
(months since last serviced) is being displayed will reset the numbers stored in H4, H5, H6, H7, H8 and H9.
Program Reset
The Analyzer control can be reset to original factory
parameters when viewing the H0 parameter. Press
and hold the SET button for three seconds while H0 is
displayed. Release the button. All settings except for Time
of Day and Day of Week will be reset. The Analyzer control
will now display three dashes indicating that the resin
volume must be set.
System Capacities
The Analyzer control software contains the following
preloaded system capacities for each salt setting (please
see the Performance Data Sheet on page 3 for certified
claims):
Salt: Lbs/Ft3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Cap KG: 10x44 1.00
14
18
21
23
25
27
28
30
31
32
33
34
35
36
36
37
Cap KG: 12x48 1.50
21
27
31
35
38
40
43
45
46
48
50
51
52
54
55
56
Cap KG: 12x48 2.00
28
36
42
46
50
54
56
60
62
64
66
68
70
72
72
74
