Chapter 5. Logging Data
84
Model PM880 Portable Hygrometer User’s Manual
5.4 Ending a Log
The
End
and
End All Logs
commands enables you to stop a log that is
currently running or pending. Once you end a log it cannot be restarted.
Note:
The PM880 also has an
Pause
command that enables you to stop
the log temporarily. See
Pausing a Log
on page 82.
Use the following steps to start or restart one or more logs:
5.4.0a Accessing the Log Manager
1.
If the menu is not active, press
[MENU]
.
2.
Use the arrow key to scroll to
Logging
and press
[ENTER]
.
3.
Use the arrow key to scroll to
Log Manager
and press
[ENTER]
.
5.4.0b Selecting a Log File
1.
Use the arrow key to scroll to the desired log.
Note:
The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to
Sorting Files in the Site/Drive/Log
Manager
on page 108.
2.
Press
[MENU]
.
3.
Use the arrow key to scroll to
Log
and press
[ENTER]
.
4.
Use the arrow key to scroll to
End
or
End All Logs
and press
[ENTER]
.
The PM880 returns to the Log Manager, which displays the selected log as
Finished
.
Next, do one of the following:
•
To end another log, repeat the above steps.
•
To return to taking measurements, press
[F3]
(
Exit
) and then press
[MENU]
.
