Chapter 5. Logging Data
82
Model PM880 Portable Hygrometer User’s Manual
5.2 Pausing a Log
The PM880 has two commands to pause logs:
Pause
and
Pause All Logs
.
The PM880 can only pause logs that are currently running.
Note:
The PM880 also has an
End
command that enables you to stop the
log permanently. See
Ending a Log
on page 84.
Use the steps below to pause one or more logs:
5.2.0a Accessing the Log Manager
1.
If the menu is not active, press
[MENU]
.
2.
Use the arrow key to scroll to
Logging
and press
[ENTER]
.
3.
Use the arrow key to scroll to
Log Manager
and press
[ENTER]
.
5.2.0b Selecting a Log File
1.
Use the arrow key to scroll to the desired log.
Note:
The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to
Sorting Files in the Site/Drive/Log
Manager
on page 108.
2.
Press
[MENU]
.
3.
Use the arrow key to scroll to
Log
and press
[ENTER]
.
4.
Use the arrow key to scroll to
Pause
or
Pause All Logs
and press
[ENTER]
.
The PM880 returns to the Log Manager, which displays the selected log as
Paused
.
Next, do one of the following:
•
To pause another log, repeat the above steps.
•
To return to taking measurements, press
[F3]
(
Exit
) and press
[MENU]
.
