GE PDM, Service Manual

Page: 28 / 92

4-2 Patient Data Module 2030047-001A
Service Tool and Configuration
Overview
The Patient Data Module service tool provides the following:
„
Device information
„
Configuration including asset setting, ECG filter configuration, licensing and
software transfer
„
Diagnostics
„
Calibration
All service functions for the Patient Data Module are performed through a service
laptop.
Required equipment
The following is a list of equipment to use with the GEHC MS service tool.
If servicing the Patient Data Module using a Solar 8000M/I patient monitor:
„
PC with Microsoft
®
Windows
®
XP or 2000
™
operating system, a CD-ROM
drive, and a network card
„
Category 5 crossover cable (2028822-001)
„
ePort to host interface cable (2017098-002)
„
Solar 8000M/i patient monitor with PDM service adapter (2028845-002)
„
Patient Data Module software CD with GEHC MS Service Tool
If servicing the Patient Data Module without a host patient monitor:
„
PDM Service Tool Kit (2030924-001)
Set up the PC
Connect the PC to the Patient Data Module
There are two ways to connect the PC to the Patient Data Module. One method uses
power from the Solar 8000M/i patient monitor, the other method uses an external
power supply.