Chapter 13: Advanced Applications
5495975-1EN Rev.9
13-7
© 2013-2017 General Electric Company. All rights reserved.
Orthopedic Magnification Preferences
The following sections describe the preferences that are available to configure Orthopedic Magnification
functions. Refer to
for more information about configuring other preferences.
Configure Default Print Settings and Auto Print
You may select Orthopedic Print as a default print setting for manual printing and auto print.
1. From the Worklist screen, click [UTILITIES].
2. Select
Preferences > Image Management
.
3. Click Auto Print [EDIT].
The Default Print/Auto Print screen (
) appears.
4. Set the
Print Mode
to
Orthopedic Print
.
Note:
When “Orthopedic Print” is selected as the Print Mode, Alternative Print Mode is disabled.
Note:
When “Orthopedic Print” is selected as the Print Mode, all images printed through Auto Print will
have magnification applied.
5. Click [SAVE] to retain your changes.
Figure 13-4
Auto Print settings for Orthopedic Magnification
