GE NetworX Series, Manual

Page: 5 / 17

#
"TO ACCESS MENU, ENTER [
ρ
]" - This takes you to the MENU
for the other options.
#
"ZONE BYPASS ACTIVE" - One or more zones are bypassed.
Check zone status.
#
“SYSTEM TROUBLE, ENTER [
ρ
] [2]” – This will identify the
service condition. Consult your security system’s user manual for
more information or call your installer.
#
"POWER FAILURE" - Your system has lost electrical power.
#
"LOW BATTERY" - Your backup battery has failed a system
battery test.
#
"PHONE LINE TROUBLE" - Your system has detected a problem
with the phone line.
#
"SYSTEM IS ARMED IN THE STAY MODE. ENTER CODE TO
DISARM. EXIT DOOR DELAY IS OFF." - Your system is
armed in the INSTANT Mode. Refer to page 6 for details.
#
"WHEN FINISHED, HANG UP" - Disconnect from the
“Operator” by hanging up.
Section II. U
SING THE
M
ENU
When the “Operator” is on the line, the System Status will be stated. To
access the MENU for the various features of your system, press
ρ
.
The messages listed below are presented. Press the appropriate
number for the desired MENU selection.
#
"FOR ZONE STATUS, ENTER [0]" - For checking open/faulted
zones. Refer to page 8.
#
"TO CHANGE AREA, ENTER [1]" - For changing the area.
#
“FOR SYSTEM STATUS, ENTER [2]” – For checking
armed/disarmed status of system. Refer to page 4.
#
"FOR ALARM MEMORY, ENTER [3]" - For checking Alarm
Memory. Refer to page 12.
#
"TO TEST SIREN, ENTER [4]" - For testing the siren.