16
Depending on the MRI machine model, you will be installing a 15-pin (685) or 25-pin (680) AutoVoice
Adapter in the machine’s console PC .
9. AUTOVOICE ADAPTER CONNECTION
I N S T A L L A T I O N
9.1 Open the case of the console PC .
Locate the 25-pin DSUB AUDIO BOX or
the 15-pin DSUB connector attached
to the port labeled J7 .
9.4 Re-connect the original pin
connector into the back side of the
AutoVoice Adapter . Tighten all screws
until snug . Close panel and run cable
up to Digital Amplifier.
9.2 Using a small screwdriver, detach
the existing pin connector .
9.3 Before installing, run the AutoVoice
Adapter cable through the opening in
the computer panel . Connect the new
adapter back into the J7 port .
J7
IM-1505 Rev. D
9.5 Plug AutoVoice Adapter terminal clip
into
INPUT 1 of the Digital Amplifier.
Button should be set to
LINE/TEL and
pushed out .
BUTTON
