GE MP100 Series, Service Manual

Page: 199 / 314

Checkout procedures
2026419-033E CIC Pro™ 7-13
Check COMM ports
NOTE
The CIC Pro center application must be stopped before conducting this test.
1. Log on to the CIC Pro center as Administrator on page 4-3 .
2. From the desktop, launch Internet Explorer.
3. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
4. Click Diagnostics > Preventative Maintenance > COMM Port Test .
5. Verify all ports are configured properly.
Check BIOS information
1. If you have not already logged onto Webmin, Log on to the Webmin service
interface on page 4-7 .
2. Click Diagnostics > Preventative Maintenance > Bios Information .
Property Value Acceptable limits
System Voltage (5V) Actual real-time voltage of the CIC Pro
center’s 5-volt internal power sub-
system. 4850 — 5250 mV
System Voltage (12V) Actual real-time voltage of the CIC Pro
center’s 12-volt internal power sub-
system. 11400 — 12600 mV
CPU Temperature Real-time CIC Pro center’s internal
temperature at the CPU. 5 — 90 C
Enclosure
Temperature Real-time CIC Pro center’s internal
temperature. 5 — 70 C