GE MONOGRAM ZV800SJSS Dimensions And Specifications Download Page 3

ZV800SJ/BJ – GE Monogram

 36" Chimney Hood

Specifi cation Created 8/04

130664

Cabinet Requirements

This hood may be installed beneath a wall-mounted cabinet.
•  Both vented and recirculating operation can be accomplished in an 

under-cabinet installation.

•  If the cabinet has been installed, it must be removed so that wall 

framing supports can be added.

The cabinet must be at least 20" high between the bottom frame and 

the inside top. A custom cabinet or modifi cations to a different size 

cabinet may be required to accommodate the hood housing.
• The cabinet must be 36" wide.
•  The cabinet must be fi rmly secured to wall studs or the added 

framing support and capable of supporting 100 pounds.

Ductwork, Wiring

• Determine the exact location of the vent hood.
• Locate the Rear Wall Template packed with the literature.
•  Measure 36"  from the fl oor to the top of the cooking surface. Add 

the pre-determined hood installation height. Mark that location.

• Use a level to draw a straight pencil line on the wall.

•  Tape the template in position along the penciled line. Check to be 

sure the template is level.

•  Use the level to draw a line straight up, from the centerline on the 

template to the ceiling.

•  Measure 3-3/34" from the back wall to the centerline of a 6-1/2" 

hole on the ceiling.

NOTE:

 If drywall is not present, add drywall thickness to the 

3-3/4" dimension.

House Wiring Location:

• The junction box is located on the top right side of the hood.
•  Wiring should enter the back wall 20" to 26" above the bottom of 

the hood, and within 4" of the right side of the centerline. Wiring 

should enter at least 4" above the bracket on the right side.

*25-1/2" Recommended

24” Min.

30” Max.

20” Min.

19-1/2"

11-3/4"

11"

19-1/2”

11-3/4”

11”

REAR WALL TEMPLATE

CL

49-80271    JR 07-04

Drill 1/8"
Pilot Holes

Drill 1/8"
Pilot Holes

Drill 1/8"
Pilot Holes

Drill 1/8"
Pilot Holes

Drill 1/8"
Pilot Holes

Drill 1/8"
Pilot Holes

ALIGN BOTTOM EDGE WITH  

PENCIL LINE INDICATING  

BOTTOM OF THE HOOD.

5-1/16"

9-5/8"

8-1/8"

2-1/16"

13-3/4"

12-3/4"

Ceiling

3-3/4” centerline

to wall

Listed by 

Underwriters 

Laboratories

R

For answers to your Monogram,

®

 GE Profi le

 or 

GE

®

 appliance questions, visit our website at 

ge.com or call GE Answer Center

®

 service, 

800.626.2000.

Summary of Contents for MONOGRAM ZV800SJSS

Page 1: ...copic duct cover conceals the ductwork running from the top of the hood to the ceiling The duct cover is sized to reach 8 ft to 10 ft ceiling heights The hood installation height from the cooking surface to the bottom of the hood depends upon ceiling height Installation Information Before installing consult installation instructions packed with product or available online at monogram com for curre...

Page 2: ...stallation height is determined by the ceiling height The hood installation height must be 24 Min above the cooking surface Listed by Underwriters Laboratories R For answers to your Monogram GE Profile or GE appliance questions visit our website at ge com or call GE Answer Center service 800 626 2000 36 Min 24 Min 30 Max 24 Min 20 Min The vent hood must be installed 24 min and 30 max above the cook...

Page 3: ...pe the template in position along the penciled line Check to be sure the template is level Use the level to draw a line straight up from the centerline on the template to the ceiling Measure 3 3 34 from the back wall to the centerline of a 6 1 2 hole on the ceiling NOTE If drywall is not present add drywall thickness to the 3 3 4 dimension House Wiring Location The junction box is located on the t...

Page 4: ...ign seamlessly finished edges and front mounted touch controls Powerful ventilation A four speed 500 CFM fan blower with boost option captures the smoke and steam produced by high performance cooking equipment Multilevel halogen lighting Six levels of intensity from accent to ambient settings allow you to choose the lighting to match the cooking task or occasion Easy maintenance Stainless steel filt...

Reviews: