GE Monogram ZV30RS, Technical Service Manual, Page: 13 / 28

– 13 –
3. Loosen the 2 wire retaining screws and
remove the wires from the heat lamp socket.
Clamp
Clamp
2 Screws
Socket
Clamps
Switch
4 Connectors
Retainer
Heat Lamp Switch
Removal and Replacement
1. Remove the
Heat Lamp Panel
.
2. Press the switch clamps in and pull the
switch from the heat lamp panel.
3. Label and disconnect the 4 electrical
connectors from the heat lamp switch.
Surface Lights
Removal and Replacement
WARNING: Surface lights may be hot.
1. Turn the trim ring counterclockwise until it falls
from the socket.
2. Remove the light from the socket.