13
• Remove outer carton.
– Carefully cut banding at the top and bottom.
• Slide out back corner posts (2).
• Slide carton off top of cabinet.
NOTE:
IT IS NOT NECESSARY TO LAY CABINET DOWN
IN ORDER TO REMOVE SKID!
• The unit is secured to the skid with 4 slotted tie-
down straps. First remove the 5/16
″
bolts from the
base channels in the tie-downs, then remove the
7/16
″
bolts securing the straps to the skid.
• Protect the flooring. Cut a large piece of the
cardboard carton and place under the product.
• Support blocks on the bottom must be removed
before the refrigerator is taken off the skid or
damage will occur. Remove support blocks by
carefully tilting cabinet to side and sliding out.
Step 1
Remove
Packaging
CAUTION
Refrigerator and freezer is much heavier at the
top than at the bottom – be careful when moving.
When using a hand truck, handle from side only.
PRUDENCE
Le réfrigérateur est beaucoup plus lourd en
haut qu'en bas. Il faut être prudent lors des
déplacements. Si un diable est utilisé, il faut
soulever le réfrigérateur sur le côté seulement.
CAUTION
DO NOT ATTEMPT TO ROLL UNIT OFF SKID.
PRUDENCE
IL NE FAUT PAS ESSAYER DE FAIRE ROULER LE
RÉFRIGÉRATEUR POUR L'ENLEVER DE LAY PALETTE.
7/16" Bolt
•Lift the refrigerator off the skid with an appliance
dolly. Handle from the sides.
Installation
36
″
Refrigerators, Freezers
