Monogram.
™
Specification Revised 6/00
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
ZICS36NA–GE Monogram 36" Built-In Stainless Steel Bottom Mount
Refrigerator with Automatic Icemaker
Dimensions and Specifications (in inches)
4"
24 3/4"
Side View
36" Overall"
35" Case
Front View
26 3/4"
73-1/2"
10 3/4" Max
10" Min
84 1/2" Max*
83 1/2" Min
26"
* 84" Shipping Height. For any other Height Installation
order either ZGCSS36RH (right-hand) or
ZGCSS36LH (left-hand).
7"
Wall View
Electrical
Area
84 1/2" max
83 1/2" min
Finished
Opening
74" From Floor
to Bottom
of Electrical
5"
5"
3 1/2"
5"
3 1/2"
Water Supply
24 3/4" Total
Depth
*Finished Width
7 1/2"
*36” Min. for a flush installation.
35-1/2” Min. for a semi-flush installation.
Note: Additional cutout width may be required when side panels
are used. Add side panel thickness to the finished cutout to
calculate rough-in width. See installation examples on the
following page.
ZICS36NARH
Handle on the left side, the door swings
left to right.
ZICS36NALH
Handle on the right side, the door swings
right to left.
These refrigerators are equipped with special
hinges that allow the door to swing out and away
from the cabinet. No clearances are required on
the sides.
When the refrigerator is installed in a corner:
• A 4” min. clearance on the hinge side will
assure a 90° door opening and access to
all drawers.
• A 10” clearance on the hinge side is
required for removal of pans.
• To achieve a flush fit the finished cutout
width must be at least 36” wide.
• In a semi-flush installation, the finished
cutout must be 35-1/2”.
• The electrical and water locations must
be located as shown for either type
of installation.