GE Monogram ZIC360NXRH, Installation Instructions Manual

Page: 12 / 20

12
STEP 5 LEVEL REFRIGERATOR
$OOPRGHOVKDYHSRLQWOHYHOLQJ7KHIURQWLVVXSSRUWHG
by leveling legs, the rear is supported by adjustable
wheels. Both are accessible from the front of the
refrigerator.
‡7ROHYHOWKHEDFNRIWKHUHIULJHUDWRUWXUQWKH
”
hex
QXWORFDWHGDERYHWKHIURQWZKHHOV7XUQFORFNZLVHWR
raise or counterclockwise to lower the refrigerator.
‡)RUIURQWOHYHOLQJXVHD
”
open-end wrench.
‡$GMXVWKHLJKWRIUHIULJHUDWRUWRPDWFKLQVWDOODWLRQ
cutout opening 83-1/2 to 84-1/2
”
7KHUHIULJHUDWRU
should be level and plumb with cabinetry.
STEP 7 SECURE REFRIGERATOR
TO CABINETRY
Whenever possible, perform this step for anti-tip
security, or when anti-tip brackets cannot be used.
7KHUHIULJHUDWRUPXVWEHVHFXUHGWRSUHYHQWWLSSLQJ
‡5DLVHWKHJULOOHSDQHOWRDFFHVVFDVHWULP
‡'ULOOKROHLQWULPDQGGULYHVFUHZWKURXJKWKHWULPLQWR
adjacent cabinet.
‡)ROORZWKHVDPHSURFHGXUHRQWKHRSSRVLWHVLGH
Drive Screws
Through Case Trim and Into
Adjacent Cabinets
CAUTION:
7KHUHDUOHYHOLQJZKHHOVDQGIURQWOHYHOLQJOHJVDUH
limited to a maximum height adjustment of 1
”
. If the
installation requires more than 84-1/2
”
height, the
installer should elevate the refrigerator on a sheet
RISO\ZRRGRUUXQQHUV&DELQHWU\WULPFRXOGDOVREH
added across the top of the opening to shorten the
opening. If you attempt to raise the refrigerator more
than 1
”
, you will damage the front leveling legs and the
rear leveling wheels.
PRUDENCE
/HVURXHVGHQLYHOOHPHQWDUULqUHHWOHVSDWWHVGH
QLYHOOHPHQWDYDQWSHUPHWWHQWXQUpJODJHPD[LPDO
GHPPSR6LO·RXYHUWXUHSRXUOHUpIULJpUDWHXU
DXQHKDXWHXUVXSpULHXUHjPSR
O·LQVWDOODWHXUGRLWpOHYHUOHUpIULJpUDWHXUVXUXQHIHXLOOH
GHFRQWUHSODTXpRXGHVJOLVVLqUHV,OHVWpJDOHPHQW
possible d’ajouter des baguettes de finition des
SODFDUGVVXUOHKDXWGHO·RXYHUWXUHDILQGHODUpGXLUH
/HYHUOHUpIULJpUDWHXUGHSOXVGHPPSR
endommage les pattes de nivellement avant
et les roues de nivellement arrière.
Installation Instructions
STEP 6 ALTERNATE ANTI-TIP
PROCEDURE
The refrigerator must be secured to prevent tipping.
The anti-tip brackets cannot be used on metal wall
studs. Use this Alternate Procedure to secure the
refrigerator against tip-over whenever metal wall
studs are encountered and there is no soffit.
‡5DLVHWKHJULOOHSDQHOWRDFFHVVFDVHWULP
‡8VHD
”
bit to drill four evenly spaced clearance
holes through the metal top case trim.
‡8VHD
”
bit to drill to pilot holes through the metal
FOHDUDQFHKROHVDQGLQWRWKHZRRGVRIILW7KHKROHV
should be centered in the soffit or a 3/4
”
min. wood
EUDFH7KHEUDFHVSDQQLQJWKHHQFORVXUHPXVWEH
securely fastened to cabinets on both sides.
‡,QVWDOOIRXU
”
drywall screws into the pilot holes.