Tools and
Materials
Required
Measure carefully when cutting countertop.
Make sure sides of opening are parallel and
rear and front cuts are exactly perpendicular
to sides.
• The Monogram gas updraft cooktop is
designed to fit in a 36" or larger base cabinet.
• The countertop cutout for cooktop must be:
– 34-1/2" wide
– 18-1/8" deep
– Allow at least 4-5/8" clearance between
back of cutout and wall.
– Allow at least 8-13/16" clearance from right
and left side of cutout to adjacent wall.
– Allow at least 2-1/4" clearance between
front of cutout and front edge of
countertop.
Installation Preparation
G a s Updraf t Cooktop
4
Caution:
Wallcoverings,
countertops and cabinets should
withstand 200
°
F heat generated
by the cooktop.
• Cooktop requires 3" free space below
countertop.
• If installing cooktop above a cabinet with
drawers, it may be necessary to use a shorter
length drawer to allow clearance for gas
connection.
• In some cases, two 3/8" I.D. 45
°
elbows and
a pipe nipple may be added between regula-
tor and cooktop to move regulator further
back in order to avoid interference with
drawer.
• Carpenter’s square
• Pipe wrench
• Manual gas line
shut-off valve
• 3/4" NPT x 3/4"
I.D. or 1/2" NPT x
1/2" I.D. flare
union adaptor for
connection to
supply line
• 1/2" NPT x 3/4"
I.D. or 1/2" I.D.
flare union adaptor
for connection to
regulator
• Gas-resistant pipe
joint sealant
• Self-adhesive gasket
(supplied)
• Two clamping
brackets and
screws (supplied)
• Gas pressure
regulator (supplied)
• Large flat-blade
screwdriver
• Saw
• 5 foot AGA-certified
flexible metal
appliance connec-
tor, 3/4" or 1/2"
I.D. to match gas
supply line:
– If required by local
codes, use solid
pipe with fittings.
Note: Purchase new
flexible line, DO
NOT USE OLD,
PREVIOUSLY USED
FLEXIBLE LINE.
Cut the
Opening
4-5/8" Min.
Cutout to Vertical
Combustible Surface
8-13/16" Min.
to Side Wall
8-13/16"
Min.
Cutout
To Side
Wall
34-1/2"
2-1/4"
Min. From
Front of
Countertop
18-1/8"
