For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Monogram.
™
Specification Created 7/00
4-5/8" Min.
Cutout to Vertical
Combustible Surface
8-13/16" Min.
to Side Wall
8-13/16"
Min.
Cutout
To Side
Wall
34-1/2"
2-1/4"
Min. From
Front of
Countertop
18-1/8"
Cutout Information
Measure carefully when cutting countertop.
Make sure sides of opening are parallel and rear
and front cuts are exactly perpendicular to sides.
• The Monogram gas cooktop is designed to fit in
a 36” or larger base cabinet.
• The countertop cutout for cooktop must be:
–34-1/2” wide
–18-1/8” deep
–Allow at least 4-5/8” clearance between back
of cutout and wall.
–Allow at least 8-13/16” clearance from right
and left side of cutout to adjacent wall.
–Allow at least 2-1/4” clearance between front
of cutout and front edge of countertop.
• Cooktop requires 3” free space below countertop
• If installing cooktop above a cabinet with drawers,
is may be necessary to use a shorted length
drawer to allow clearance for gas connection.
• In some cases, two 3/8” I.D. 45° elbows and a
pipe nipple may be added between regulator and
cooktop to move regulator further back in order to
avoid interference with drawer.
ZGU3650—GE Monogram 36” Updraft Cooktop with 5 Burners
Cautioin:
Wallcoverings, countertops and cabinets should
withstand 200°F heat generated by the cooktop.
