15
Installation Instructions
B4 Three-Conductor Branch
Circuit Connection
When connecting to a three-conductor branch
circuit, if local codes permit:
a.
Connect the bare oven ground conductor
with the crimped neutral (white) lead to
the branch circuit neutral (white or gray
in color), using a wire nut.
b.
Connect the oven red lead to the branch
circuit red lead in accordance with local
codes, using a wire nut.
c.
Connect the oven black lead to the branch
circuit black lead in accordance with local
codes, using a wire nut. If the residence
red, black or white leads are aluminum
conductors, see WARNING on page 14.
d.
Install Junction Box Cover.
B3 New Construction and
Four-Conductor Branch
Circuit Connection
•
When installing in new construction, or
•
When installing in a mobile home, or
•
When installing in a recreational vehicle, or
•
When local codes do not permit grounding
through neutral:
a.
Cut the neutral (white) lead from the crimp.
Re-strip the neutral (white) lead to expose
the proper length of conductor.
b.
Attach the appliance grounding lead (green
or bare copper) in accordance with local
codes. If the residence grounding conductor
is aluminum, see WARNING on page 14.
c.
Connect the oven neutral (white) lead to
the branch circuit neutral (white or gray)
in accordance with local codes, using a
wire nut.
d.
Connect the oven red lead to the branch
circuit red lead and the oven black lead to
the branch circuit black lead in accordance
with local codes, using wire nuts. If the
residence red, black or white leads are
aluminum conductors, see WARNING
on page 14.
e.
Install Junction Box Cover.
Ground
Wire
Junction Box
Cover
Junction Box
Cover
Ground and
Neutral Wires