Monogram.
™
ZBD5700DBB—GE Monogram Dishwasher with Stainless Steel Interior
• Cut door panel to the dimensions shown.
• The bottom left and right corners should be
cut at 1/4” radius. See illustration.
NOTE
: The trim will conceal the cut edges of
the panel.
1/4" Thick
Door Panel
25-1/2"
23-1/8"
1/4"
Radius
Cut
Custom Door and Access Panel Dimensions
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Revised 12/98
Dim. A*
*Height
23-1/8"
Custom
Panel Size
Floor
Cabinets
Countertop
Top
3/4" Max.
3/4" Thick
Door Panel
Bottom of
Adjacent Cabinetry
*Height is equal to A minus 5-1/8" plus 1/4"
EXAMPLE:
*Height = 30-1/2" minus 5-1/8" plus 1/4" is equal to 25-5
The custom panel should be constructed in
the same manner as cabinet doors. All edges
can be seen and must be finished for the
best appearance.
• Measure dimension A, from underside of
countertop to bottom of adjacent cabinets.
–Subtract 5-1/8”. Control panel height is 5”.
Allow 1/8” for gap between bottom of
countertop and top of control panel.
–Add 1/4”. The custom panel will slide up,
behind control panel.
