GE Monogram ZBD3500, Use And Care Manual

Page: 6 / 28

OPERATING INSTRUCTIONS
SENSING
CLEAN
HI LO
POTS PANS
AUTO CHINA
NORMAL
SOIL LEVEL
ADD RINSE AID LOCKED WASHING
TEMP WATER HEATED RINSING HR.
ENERGYSAVER DRY AIR DRYING RESET DELAY
LOAD SELECTION
NORMAL
POTS
PANS CHINA
CRYSTAL
RINSE
HOLD
OPTIONS
ENERGY
SAVER
DRY
DELAY
START
RESET LOCK START
Select Cycle/Option Before you Begin
Starting the Cycle
2
3
1
3
2
Your dishwasher is designed to give maximum
performance on loads with normal and heavy soils.
The Display
This display tells you what is happening in the
dishwasher and can alert you to some possible problems.
It also remembers your last cycle so you don’t have to
reprogram each time. See Shortcut section.
Information displayed:
• Load Selectios
• Options
• When the dishwasher is sensing the amount of soil
in the load.
• Cycle phase, such as WASHING, RINSING or
DRYING
• Diagnostic codes to alert you to possible problems
• Time remaining in the cycle will be displayed approx.
10–15 minutes after cycle has started.
• The amount of soil in the load.
See the display section for explanation of displays
and codes.
The Active Vent—The vent will close during washing
to retain heat and reduce noise. After washing it will
open to vent moisture and help the dishes dry faster.
• Load dishware. (See Loading
section.)
• Add detergent. (See Detergent
Dispensers and Detergent Guide
sections.)
• Check rinse agent level. (See Rinse
Agent section.)
• Close and latch the door.
NOTE: If dishwasher drains into a
garbage disposal, operate the disposal
until it is empty before starting the
dishwasher.
Touch the center of the pad to select
your desired Load Selection and
Options. Touch the START pad to begin the
cycle.
NOTE: There is a time delay
between start-up and water fill so
you will not hear any wash action
right away. The dishwasher will
proceed through your entire program
and turn off automatically.
6
Features and appearance may vary.