Changing Front Panel (Models ZCG3100 and ZCG3300 only)
Remove drawer by pulling to
first stop and lifting front to clear
second stop. Place drawer on its
back. Remove two screws in
bottom edge of trim. Slide panel
out and reverse. Reinstall trim and
place drawer back in compactor.
Grounding Instructions
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current.
This appliance is equipped with a cord having an
equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with local codes and ordinances.
DANGER: Improper connection of the
equipment grounding conductor can result in a risk of
electric shock. Check with a qualified electrician if
you are in doubt as to whether the appliance is
properly grounded.
Do not modify the plug with this appliance. If it will
not fit the outlet installed, have a proper outlet
installed by a qualified electrician.
PREFERRED
METHOD
Ensure proper ground
exists before use
INSTALLATION
Electrical Requirements
CAUTION: Before Plugging In Compactor,
Read The Following Electrical Requirements.
CAUTION: For Personal Safety, Do Not
Use An Extension Cord Or Adapter Plug With
This Appliance.
Do Not Under Any Circumstances, Cut Or
Remove The Third Grounding Prong From
The Power Cord.
Follow National Electrical Codes Or
Prevailing Local Codes And Ordinances.
This appliance must be supplied with 120V, 60HZ and
connected to an individual, properly grounded branch
circuit protected by a 15 or 20 amp circuit breaker or
time delay fuse.
If the electric supply provided does not meet the
above requirements, call a licensed electrician.
Car
e and Cleaning
Installation
9
