GE Moisture monitor series 3, Programming Manual

Page: 83 / 99

March 2008
4-4 Programming with PanaView
Changing Alarm Settings
PanaView enables you to set or change alarm settings for the
MMS-3
. You can determine which sensor and unit serve as the alarm,
the trip and deadband values, and the alarm’s reaction to errors.
1.
From the “ New Meter Browser ” option, pull down the desired
meter, and click on the desired channel.
2.
From the channel menu, click on the
Alarms
option, and then on
“
Alarm A
” or “
Alarm B
.” The
Alarm
window appears, as shown in
Figure 4-3 below.
Figure 4-3: Alarm Programming Window
3.
To set the alarm sensor and unit
a.
Pull down the “ Sensor” list box in the lower part of the
window.
b.
Then click on the desired sensor type.
c.
A list of units appears. Click on the desired unit.
4.
To set the alarm type, click on the
[Trip Above]
or
[Trip Below]
radio
buttons, as desired.